* Website Under Construction *
menu
| Outlet Thread Size | 16x1.5 |
| Housing Material | Cast Iron |
| Outlet Quantity | 1 |
| Is Prop Sixty Five Affected | No |
| Pulley Attachment Type | Press-on |
| Filter Included | No |
| Is the item CARB affected | No |
| Power Steering Pump Outlet Attachment Type | Threaded |
| Inlet Attachment Type | Barb |
| Inlet Quantity | 1 |
| FAQs | Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals. |
| Hose Port Type | O-Ring |
| Pulley Belt Type | Serpentine |
| Pulley Included | No |
| Is Or Contains A Battery | No |
| Product Condition | New |
| Contains Electronic Components? | No |
| FAA_A4 | There may be debris in the flow control valve bore not allowing the flow control valve to move as it should. (Valve and bore are located behind the high pressure fitting on the pump). The system must be checked for contamination and flushed. |
| FAA_A5 | Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals. |
| FAA_A2 | The problem is most likely in the steering unit−the pump does not know left from right. Check for binding steering components and repair as necessary. |
| FAA_A3 | The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced. |
| FAA_A1 | A whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems require special vacuum bleeding procedures. |
| Outlet Attachment Type | Threaded |
| Prop 65 | NO |
| E-Waste | No |
| Is Item A Chemical | No |
| FAQ_Q5 | Should I ever change my fluid, even though nothing is wrong? |
| FAQ_Q4 | I only have assist when increasing engine rpm after installing the replacement pump. What's causing this? |
| Features and Benefits | Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle. |
| Is or contains a bulb? | No |
| Power Steering Pump Outlet Quantity | 1 |
| FAQ_Q1 | Why is the pump making a whining noise all of the time? |
| FAQ_Q3 | I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do? |
| FAQ_Q2 | Why do I still have hard steering in one direction after I replaced the pump? |
| Package Contents | Hydraulic Pump; Instruction Sheet; Sealing Kit |
| Does it require SDS | No |
| First Application Year | 1980 |
| Inlet Diameter | 0.423 |
| Power Steering Outlet Thread Size | 16x1.5 |
| Is item a chemical? | No |
| SDS Required | No |
| Reservoir Included | Yes |
| Remote Reservoir | No |
| Is the item CARB affected? | No |
| Shaft Type | Press-On |
| Power Steering Pump Inlet Attachement Type | Barb |
| Mounting Hardware Included | No |
| Pulley Attachement Type | Press-On |
| Type | Hydraulic |
| Is Or Contains A Bulb | No |
| Is or contains a battery? | No |
| Power Steering Reservoir Cap Included | Yes |
| Contains Electronic Components | No |
| Part Terminology | Power Steering Pump |
